Answer:
- Preparations before pairing:
- Make sure your phone’s Bluetooth is turned on—this is required to detect and connect to your mower during pairing.
- Press and hold the OK button on the mower for 3 seconds to power it on.
- Enter the PIN code to unlock the mower (the default PIN is 0000).
→ For step-by-step instructions on how to enter the PIN, see: How to input the PIN code to unlock the mower?
- Pairing process:
- Press and hold the Mow and Home buttons on the mower at the same time for 3 seconds.
When you see the Wi-Fi logo blinking and hear the voice prompt “Entering Network Configuration Mode”, release the buttons. - Open the Roborock app on your phone.
- Tap Add Device → Add Manually → Nearby Devices.
Select your mower from the list of available devices.
You’ll hear “Bluetooth Connected Successfully.” - Select your Wi-Fi network and enter the password.
Tap Next.
You’ll hear “Starting Network Connection, please wait.” - Once connected, you’ll see a confirmation that pairing is successful.
- Review and accept the Privacy Policy notice.
- You’ll then be taken to the device page in the app.
Or, you can pair your mower by scanning its QR code:
→ If you’re not sure where to find the QR code on your mower, see: Where to find the QR code in order to pair with the mower?